Articulated Wheel Loader


Product Information Sheet

All of the technical information on this product at a glance on the Product Information Sheet.


The wheel loader WL52 should not be missing on any construction site. In addition to powerful hydraulics, it also offers an extremely easy-to-use joystick pilot control to allow operators fatigue-free working, even during long workdays. The powerhouse with lots of power in the engine also convinces with high ripping forces and amply dimensioned tipping cylinders. Ideally suited for frequent material handling and many loading cycles.

  • Comfortably equipped cabin with optimal ergonomics and a clear overview
  • Tilt-down operator’s cab allows for easy access to the engine, hydraulics and electronics – which saves time and money
  • Powerful hydraulics with many options (e.g. Highflow) for a wide range of attachments and applications
  • Very high ripping forces due to the large-sized tipping cylinders
  • WL52 with powerful Z-kinematics and low front carriage for extra tipping load and an overview of the working area

Engine / Motor

Engine / Motor manufacturer Deutz
Engine / Motor type TCD 2.9 L4 S5
Cylinder 4
Engine performance 55.4 kW
at rpm Maximum 2,300 rpm
Displacement 2,900 cm³
Coolant type Water / charge air
Emission standards stage V

Electrical system

Operating voltage 12 V
Battery 95 Ah
Alternator 95 A


Operating weight 5,100 kg
Tipping load with bucket – machine straight 3,949 kg
Tipping load with bucket – machine at angle 3,416 kg
Tipping load with pallet fork – machine straight 3,055 kg
Tipping load with pallet fork – machine at angle 2,555 kg

Vehicle data

Bucket capacity Standard bucket 0.85 m³
Traction drive Hydrostatic via universal joint shaft
Axles PA1400
Drivers cab Cab
Speed (optional) 0-20 (30) km/h
Speed Level 2
Standard tires 405/70 R 18 EM ET0

Hydraulic system

Driving hydraulics – operating pressure 450 bar
Operating hydraulics – operating pressure 220 bar
Operating hydraulics – discharge capacity 73.6 l/min
Operating hydraulics – discharge capacity (optional up to) 115 l/min

Filling capacities

Fuel tank capacity 82 l
Hydraulic oil tank 66 l

Sound level

Guaranteed sound power level LwA 101 dB(A)
Specified sound pressure level LpA 78 dB(A)

  • Standard tires
    405/70 R 18 EM ET0
  • A
    Overall length
    5,420 mm
  • B
    Overall length without bucket
    4,760 mm
  • C
    Bucket pivot point to axle center
    1,040 mm
  • D
    2,110 mm
  • E
    Rear overhang
    1,530 mm
  • F
    Height with low cabin
    2,498 mm
  • F
    Height with high cabin
    2,680 mm
  • H
    Seat height
    1,590 mm
  • J
    Total operating height
    3,930 mm
  • K
    Stroke height max. – bucket pivot point
    3,240 mm
  • L
    Overhead loading height
    2,980 mm
  • M
    Dump height max.
    2,470 mm
  • N
    Range with M
    625 mm
  • O
    Scraping depth
    96 mm
  • P
    Overall width
    1,810 mm
  • Q
    Track width
    1,400 mm
  • S
    Ground clearance
    370 mm
  • T
    Radius maximum
    4,240 mm
  • U
    Radius at outer edge
    3,850 mm
  • V
    Inside turning radius
    1,910 mm
  • W
    Articulation angle
    40 °
  • X
    Bucket rollback at max. stroke height
    71 °
  • Y
    Dump angle Maximum
    45 °
  • Z
    Bucket rollback at ground level
    43 °