Diesel Reversible Vibratory Plate

DPU4045 – Quickly and reliably to the destination

  • The new center pole reduces hand-arm vibration (HAV) to a minimum and therefore offers a high level of operating comfort at full compaction performance. No restriction for the time of operation and no documentation effort.
  • A dead man function prevents the operator from being trapped between the equipment and an object when working in reverse.
  • All maintenance points are quickly and easily accessible. Extensive comfort functions: such as low oil shutdown, self-tightening V-belt, maintenance-free alternator, pull-out external jump-start connection that is accessible from outside.
  • A large dimensioned Yanmar diesel engine offers sufficient power reserves and ensures for a high level of efficiency and long service life.
  • New positioning of the operator’s controls in a sturdy housing — better protection against dirt accumulation and damage.

Product Information Sheet

All of the technical information on this product at a glance on the Product Information Sheet.


Thanks to its excellent compaction force combined with a quick forward and reverse travel direction, the DPU4045 offers a high level of productivity. It is equipped with a Yanmar diesel engine and is an all-rounder for all job sites where high demands are placed on the performance efficiency of a unit. In addition, it offers excellent characteristics in terms of service life and operating comfort. Optimal application areas are the compaction of frost coverings and subbases in street, path and parking lot construction as well as backfilling buildings. Thanks to a frequency of 69 Hz, the DPU4045 is universally applicable and even reliably compacts medium-weight interlocking paving stones.

Operating weight 376 kg
Centrifugal force 40 kN
Base plate size (W x L) 440 x 900 mm
Base plate thickness 12 mm
Height (without center pole) 764 mm
Operating width (with extension plate) 600 mm
Frequency 69 Hz
Hand-arm vibrations < 2.5 m/s²
Advance travel max. (dependent on soil and environmental impacts) 24 m/min
Surface capacity max. (dependent on soil and environmental impacts) 870 m²/h

Engine / Motor


Engine / Motor type Air-cooled single cylinder four-cycle diesel engine
Engine / Motor manufacturer Yanmar
Engine / Motor L70N
Displacement 320 cm³
Engine performance max. (DIN ISO 3046 IFN) 4.5 kW
at rpm 3,000 rpm
Operating performance max. (DIN ISO 3046 IFN) 4.3 kW
at rpm 3,000 rpm
Fuel consumption 1.4 l/h
Fuel tank capacity 3.3 l
Power transmission From the drive motor via the centrifugal clutch and V-belt directly to the exciter
Fuel type Diesel
Shipping Weight 380.kg
Shipping Width 0.7m
Shipping Height 1.2m
Shipping Length 1.2m
Shipping Cubic 1.008m3